*You must have Version 1.10 installed for this feature
Control Change Output Switch
1. While holding down the [DUAL] button, press the [1] button.
* Continue to hold down the [DUAL] button, and proceed to the next step.
2. Use the numeric buttons to select a value.
*Parameter Value Explanation Control change output mode
[1] No output
[2] Output only to USB
[3] Output only to MIDI
[4] Output to USB and MIDI
3. Release the [DUAL] button to confirm the value.
MEMO
The control changes of the Lower part are transmitted and received on the channel that is one higher (+1) than the specified channel. However, if channel 16 is specified, the Lower part uses channel 1.