RD-2000: Formatting a USB Flash Drive

Use the following procedure to format a USB flash drive for use with the RD-2000:

NOTE

- Use a USB flash drive with a capacity of 32 GB or less, formatted in FAT32.
- Never turn off the unit while the screen indicates “Processing...”
- Don’t disconnect the USB flash drive until formatting is completed.

1. Press the [MENU] button.
2. Cursor to “Utility,” and press the [ENTER] button.
3. Cursor to “Format USB Memory” and press the [ENTER] button.
   
   If you decide to cancel the Format operation, press the [EXIT] button.
4. To execute the Format operation, press the [ENTER] button.
5. Move the cursor to “OK” and press the [ENTER] button once again to execute the Format operation.