ES-5: How to use the MUTE switch for Channel Switching
1. PRESS EDIT - use the LFT/RT Arrow buttons < > to navigate to CTL/EXP - press [ENTER] - select MUTE press [ENTER] - set MUTE FUNCTION TO:
CTL1 using +/- buttons,
Set MIN to OFF,
Set MAX to ON,
MODE to MOMENTARY.
2. Press [WRITE] once and select desired PATCH location and press [WRITE] once more to save edits.
3. On the back side of the ES-5:
Connect 1/4" TRS Stereo Cable to EXT CTL: CTL 1/2 OUTPUT to the AMP or device INPUT JACK used for Foot Switch.
NOTE: Every AMP and device is different and you may have to change the MODE from MOMENTARY to TOGGLE/LATCH depending on what the device dictates and implementation of a LINE INSERT CABLE may be necessary depending on what the AMP or DEVICE uses for it's foot switch cabling.
4. Press ES-5 MUTE switch to TEST and CHECK the Channel Switching.