The PCR-M1 MIDI Controller can be connected to a computer so it can be integrated with music software applications. This will use a standard USB cable connected to the square USB port on the back of the PCR and then to a standard USB port on your computer.
1. On the PCR-M1, press the EDIT button.
2. Press the "System" key - the display will indicate "SY0."
3. Press the "6" key. The display will indicate “SY6,” then press the ENTER button.
4. Use the VALUE knob to specify the USB Driver Mode setting.
- Original ("orG") - This mode requires that a Roland USB driver be installed on your computer.
- Generic ("GEn") - This mode does not require a Roland USB driver, so is useful for newer operating systems (the last USB drivers for the PCR-M1 released by Roland supported Windows 8/8.1 and OSX 10.9 Mavericks).
5. Press the ENTER button to return to Play mode.
6. Re-start the PCR-M1 to finalize the setting.
If you set the "OFF" settign for the Advanced Driver Switch setting, skip to step 9 below.
7. Download and install the PCR-M1 USB driver for your computer and connect the USB cable. You can download the latest drivers from our website here.
Make sure you download the driver that corresponds to the type of computer you have (Mac or Windows-based) and the version of operating system you are using. Once downloaded, you will need to run the setup application to install the driver into your system. This may include re-starting your computer.
8. Confirm that the USB driver is installed correctly and that the computer is communicating correctly with the PCR-M1.
- On a Macintosh, look in the Audio MIDI Setup utility and confirm that the PCR-M1 is listed in the MIDI Studio window.
- On a PC, open the Device Manager and confirm that the PCR-M1 is listed under "Sound, video, and game controllers."
10. Activate or enable the PCR-M1 in your music software. You will need to consult with the documentation for your specific application for this, but usually there is a preferences menu where you will need to enable the PCR-M1 so it can be used by your software.