GT-100: How to Calibrate the On-board Expression Pedal
To re-calibrate your Expression Pedal for the GT-100:
1. Press the [SYSTEM] button.
2. Turn knob [4] to select “PDLCALIBRATION“ (PEDAL CALIBRATION).
3. Press the heel end of the [EXP] pedal, and press the [WRITE] button.
4. Press the toe end of the [EXP] pedal, and press the [WRITE] button.
5. Firmly press the toe end down of the [EXP] pedal.
6. Verify that the EXP PEDAL SW indicator lights when you strongly press the toe end.
7. If you want to change the SWITCH sensitivity of the EXP PEDAL SW indicator, repeat step 5 and adjust the THRESHOLD value with knob [5] until the TOE DOWN feel is set to the preferred sensitivity. Test and check.
8. Press the [WRITE] button . The screen will indicate “COMPLETE!”