GR-55: CTL NOMAL PICKUP TONE SWITCH
There is a TONE SWITCH for the NORMAL PICKUP.
Customize this as a GLOBAL CTL setting or as a MASTER/PATCH CTL setting.
NOTE: If this is set in SYSTEM it will override the MASTER/PATCH CTL setting.
Decide if this change is a GLOBAL setting that is for every PATCH or if this customization is PATCH specific and WRITE/save-able.
For SYSTEM (GLOBAL) - PEDAL GK/CTL
1. From PATCH screen, PRESS [EDIT] - use [PAGE < >] and select SYSTEM - use [CURSORS and DIAL] to select PEDAL GK/CTL
2. Use [PAGE < >] and SELECT CTL PAGE, use [CURSORS and DIAL] to select CTL FUNCTION - TONE SW (TONE SWITCH)
NOTE: From this point, settings may vary user to user, adjust according to how the 4 tones are desired to switch.
NOTE: Keep in mind that SW-OFF is one CTL state and SW-ON is another CTL state.
If user WRITE/SAVES the PATCH with the CTL ON or OFF these are the TONES active or de-active and CTL foot switchable.
SW-OFF PCM TONE 1: ON/OFF
SW-OFF PCM TONE 2: ON/OFF
SW-OFF MODELING TONE: ON/OFF
SW-OFF NORMAL PU: ON/OFF
SW-ON PCM TONE 1: ON/OFF
SW-ON PCM TONE 2: ON/OFF
SW-ON MODELING TONE: ON/OFF
SW-ON NORMAL PU: ON/OFF
3. If the USER would like to have this be a PATCH SPECIFIC CTL customized function, then set SYSTEM - PEDAL GK/CTL to PATCH SETTING.
4. Then make settings in MASTER - PEDAL GK/CTL instead.
5. Press [WRITE] twice to SAVE your settings and changes.
Please see your GR-55 OWNER'S MANUAL PAGE 55 for reference on
PATCH SETTINGS/MASTER (WRITE/SAVE-ABLE FUNCTIONS)