GT-1: CTL1 Pedal - How To Activate Multiple Effects
For this example we will use PATCH U01 HI GAIN STACK and activate Pre-Amp Solo, Delay and OD/DS effects with the CTL 1.
A. PRE-AMP SOLO ASSIGN SETUP:
1. Press [MEMORY EDIT] to enter EFFECT CHAIN VIEW - use KNOB 1 navigate to CTL1 ICON - Press [ENTER].
2. In the CTL 1 Menu - use KNOB 1 and set FUNCTION to PrA SOLO - MODE to TOGGLE - SOLO LEVEL adjust to desired level 0-100, Press [EXIT].
B. DELAY ASSIGN A1 SETUP:
3. In EFFECT CHAIN VIEW - use KNOB 1 - select A1 ICON - Press [ENTER].
4. In the ASSIGN 1 Menu - set ASSIGN ON - SOURCE to CTL1 - MODE to TOGGLE.
5. Press [ENTER] for ASSIGN1 Page 2 - set CATEGORY to DELAY - set TARGET to ON/OFF.
6. Press [ENTER] for ASSIGN1 Page 3 - set MIN to OFF - set MAX to ON - Press[EXIT].
C. OD/DS ASSIGN A2 SETUP:
7. In EFFECT CHAIN VIEW - use KNOB 1 - select A2 ICON - Press [ENTER].
8. In the ASSIGN 2 Menu - set ASSIGN ON - SOURCE to CTL1 - MODE to TOGGLE.
9. Press [ENTER] for ASSIGN2 Page 2 - set CATEGORY to OD/DS - set TARGET to ON/OFF.
10. Press [ENTER] for ASSIGN1 Page 3 - set MIN to OFF - set MAX to ON - Press [EXIT].
11. Press WRITE [EXIT]+[ENTER] and [ENTER] four times to WRITE/SAVE the PATCH SETTINGS.
D. TEST FUNCTIONALITY:
12. PRESS CTL1 and look for OD/DS, PREAMP and DELAY lights turn ON/OFF and EFFECT CHAIN VIEW (press [MEMORY EDIT]) look for EFFECT ICONS TURN ON/OFF.
Memo: The GT-1 user can program up to 6 user custom ASSIGNMENTS.
It is possible to ASSIGN up to 6 TARGETS (parameters) to one source (CTL1, CTL2, CTL3).
Therefore, activating multiple effects at the same time with a single foot press of the CTL source.