GR-55: Expression Pedal Setup To Control EFFECT - MOD: 01 OD/DS: DRIVE LEVEL
1. First off, check that all the GR-55 SYSTEM (GLOBAL SETTINGS) > PEDAL GK/CTL parameters are set to PATCH SETTING (unless other user settings are desired).
2. Select a PATCH to work with.
3. Press EDIT, use PAGE LFT/RT ARROW < > and select SYSTEM EDIT PAGE.
4. SYSTEM EDIT PAGE parameter settings should be as follows:
CTL: CTL FUNCTION: PATCH SETTING
EXP: EXP FUNCTION: PATCH SETTING
EXP ON: EXP ON FUNCTION: PATCH SETTING
EXP SW: EXP SW FUNCTION: PATCH SETTING
GKS1: PATCH NUMBER INCREASE (or user preference)
GKS2: PATCH NUMBER DECREASE (or user preference)
GK VOLUME: PATCH SETTING (or user preference for GK-3 Controller Vol)
HOLD: ON
This will allow for the user to program the pedal parameters within the MASTER EDIT PAGE.
EXIT from SYSTEM EDIT PAGE.
5. PAGE LEFT ARROW to MASTER EDIT PAGE and navigate to PEDAL GK/CTL and PRESS ENTER.
6. Use the CURSOR BUTTON arrows and the DIAL WHEEL to navigate CTL MENU:
CTL: CTL FUNCTION: OFF (or user preference)
EXP: EXP FUNCTION: MOD CONTROL
MIN: 0
MAX: 80
EXP ON: EXP ON FUNCTION: PATCH SETTING
MIN: 80
MAX: 120
EXP SW: EXP SW FUNCTION: OFF (or user preference)
GKS1: SYSTEM (or user preference)
GKS2: SYSTEM (or user preference)
GK VOLUME: TONE VOLUME (or user preference for GK-3 Controller Vol)
HOLD: ON
Now there are 2 different states for the EXPRESSION PEDAL range: EXP 0-80 and EXP ON 80-120.
PRESS WRITE twice to SAVE to PATCH.
7. PRESS EDIT and use the PAGE LEFT/RIGHT ARROWS to navigate to the EFFECT EDIT PAGE.
8. Use the CURSOR BUTTONS and the SCROLL WHEEL to navigate and ACTIVATE and FILL the square left of MOD.
9. Select the square and roll the DIAL WHEEL to turn ON the MOD,
10. Then use the navigation arrows to select the MOD EFFECT NAME,
11. Once high lighted turn the DIAL WHEEL and select MOD: 01 OD/DS: DRIVE LEVEL and press ENTER,
12. Use the navigation arrows to select the EFFECT LEVEL and use the DIAL WHEEL to increase EFFECT LEVEL to 80 (or user preference),
13. Use the RT navigation arrow to go one section over to view MOD DRIV,
14. TEST your EXPRESSION PEDAL programming by moving pedal,
15. The MOD DRIV should track 0-80, PRESS TOE DOWN on EXPRESSION (EXP PEDAL SW ON/OFF LED should illuminate) and MOD DRIV should track 80-120.
16. PRESS WRITE twice to SAVE settings.
17. After visual check do an audible check test for 2 programmed MOD DRIVE / GAIN LEVELS.