RC-1: STOP/UNDO + FS-5U/ FS-6 / FS-7 Footswitch Setup & Functionality
The BOSS F-5U/FS-6/ FS-7 dual footswitch pedals can be connected to an RC-1 STOP/UNDO jack.
- The FS-5U set to MOMENTARY footswitch connected via 1/4" TS mono unbalanced guitar/instrument cable to the RC-1 STOP/UNDO control jack, will allow for a SINGLE STEP LOOP STOP, instead of using the onboard stompbox pedal for a DOUBLE PRESS LOOP STOP.
- 2 X FS-5U MOMENTARY footswitches may be used together to create a dual footswitch, connect via an INSERT Y CABLE/ADAPTER: [DUAL - 1/4" TS mono male cable ends to SINGLE - 1/4" TRS stereo male end]
-
The FS-6 or FS-7 set to MOMENTARY MODE connected via 1/4" TRS stereo balanced cable to the RC-1 STOP/UNDO control jack, will allow for two functions:
-
PEDAL A = OVERDUB UNDO/REDO (RING).
Note: only one layer and most recent overdub can be undone/redone. - PEDAL B = SINGLE STEP STOP or with a LONG PRESS (2 secs) will CLEAR the LOOP (TIP).
-
PEDAL A = OVERDUB UNDO/REDO (RING).
BOSS FS-5U: (FS-5L is NOT compatible) https://www.boss.info/global/products/fs-5u_5l/
BOSS FS-6: https://www.boss.info/global/products/fs-6/
BOSS FS-7: https://www.boss.info/global/products/fs-7/
CABLING EXAMPLES:
- BIC 1/4" TS mono unbalanced guitar/instrument cable example:
- BIC 1/4" TRS stereo balanced cable example:
https://www.boss.info/global/products/bcc-3-tra/
- RCC INSERT-Y cable example:
- RCC INSERT-Y cable example:
Excerpt from RC-1 Owner's Manual: