SETUP T-SCREAM EFFECT:
- First select the USER PATCH (U01-U99).
- Press [MEMORY EDIT] to enter EFFECTS CHAIN VIEW.
- Use KNOB 1 to select OD icon (if selected icon will be highlighted).
- Turn ON the OD effect by pressing the [OD/DS] button (LED will be lit RED).
- Press [ENTER] to enter into OD/DS MENU.
- Choose OD TYPE use KNOB 1 to set TYPE: T-SCREAM adjust T-SCREAM PARAMETERS to your desired settings, press [ENTER} for Page 1 and 2.
- Press [EXIT] when complete.
SETUP CTL1 FUNCTION:
- From EFFECTS CHAIN VIEW use KNOB 1 to select CT1 icon (CTL 1/CONTROL 1) and press [ENTER].
- In the CTL 1 MENU, use KNOB 1 to set FUNCTION: to OD/DS, use KNOB 2 to set MODE: TOGGLE (toggle is chosen because creating an ON/OFF latch switch).
- Programming is now complete, press the CTL1 PEDAL on the face of the GT-1, test and check the OD/DS EFFECT ON/OFF switching is functioning both visually and audibly.
- If the CTL1 and OD/DS are functioning correctly press [EXIT+ENTER] once and ENTER four times to WRITE/SAVE your settings to the current USER PATCH.
Also see GT-1 Owner's Manual Page 6 "Saving A Patch".
NOTE: If there happens to be another EFFECT activating/deactivating, check A1 - A6 ASSIGNMENTS and turn them OFF unless desired.- Press [MEMORY EDIT] to enter into EFFECTS CHAIN VIEW.
- Use KNOB 1 to select A1 for ASSIGNMENT 1 and press [ENTER], in ASSIGN1 check if SOURCE is set to CTL1, if so, use KNOB 1 to turn OFF the ASSIGN to eliminate the CTL1 double function.
- Check all ASSIGNMENTS and set similarly.
Each PATCH can have customized programming for:
- CT1: on board CTL1 pedal.
- EX1: on board EXPRESSION PEDAL
- ESW: on board EXPRESSION SWITCH toe down.
- CT2/CT3/EX2: separately purchased EXTERNAL PEDALS: CTL2/3 - BOSS FS-6, FS-7 (A&B, 2 button switch) and EXPRESSION - BOSS EV-5, EV-30, FV-500H are recommended choices.
- ASSIGNMENTS: 6 custom ASSIGNMENTS can be programmed per PATCH.
NOTE: Please check out this article for more info about CTL FUNCTIONS / ASSIGNMENTS: BOSS Device Control Function VS. Assignments Explained