Roland always recommends backing up your data in case there is a problem with your equipment or a need to restore older settings. Here are the steps to backup and restore your settings in the SE-02:
Backup
- While holding down the #2 button, turn on the power. All buttons blink green.
- Connect your computer to the SE-02’s USB port via USB cable. All buttons are lit green/orange. After a time, all buttons are lit green, and a drive named “SE-02” appears on your computer.
- Open the “SE-02” drive on your computer. The backup files are located in the “PATCH,” “PATTERN,” and “SONG” folders of the “SE-02” drive.
- Copy the backup files into your computer.
- When copying is completed, eject the USB drive on your computer, and disconnect the USB cable.
When all buttons blink green, turn off the power. - Eject the "SE-02" driver from your computer.
- Turn the SE-02 power off.
Restore
- While holding down the #3 button, turn on the power. All buttons blink orange.
- Connect your computer to the SE-02’s USB port via USB cable. All buttons are lit orange, and a drive named “SE-02” appears on your computer.
- Copy the backup files into the “PATCH,” “PATTERN,” and “SONG” folders of the “SE-02” drive.
- When copying is completed, eject the USB drive on your computer, and disconnect the USB cable.
All buttons are lit orange/red. - When all buttons blink orange, turn off the power.