This message appears on the SPD-SX and SPD-SX Special Edition (SE) when the destination pad already has a wave assigned. Unassign the pad first using the steps below.
Note: If using Wave Manager, disconnect the SPD-SX from the computer before proceeding.
- Select the kit you want to import to.
- Press [MENU].
- Select "KIT PAD" and press [ENTER].
- Hit the pad you want to import to.
- Press [-] to set the wave to "NO ASSIGN."
Repeat steps 4–5 for any other pads if needed. - Press [EXIT].
The setting is saved automatically.