DD-500: TEMPO HOLD
TEMPO HOLD needs to be set to ON, in which ever PATCH you arrive to and it will preserve the same BPM TEMPO of the prior PATCH.
If DD-500 is set to SYSTEM MENU > FSW MODE: NORMAL:
To have DD-500 patches preserve the last patches TEMPO BPM, adjust PATCH A or B TEMPO HOLD: to ON.
Press [EDIT] use [UP/DOWN ARROW] buttons, select PATCH and press [EDIT],
Use [UP/DOWN ARROW] buttons and select TEMPO HOLD: use the TIME/VALUE KNOB to set to ON.
This will allow for TEMPO to be held over from one PATCH to another or when switching BANKS and PATCHES both.
If DD-500 is set to SYSTEM MENU > FSW MODE: A/B SIMUL:
TEMPO HOLD setup and programming instructions are the same as above.
When using A/B SIMUL MODE and Tempo Hold: ON, BPM TEMPO will automatically sync together between both PATCHES A and B within the BANK as they are both active and used in parallel or series when using A/B SIMUL MODE.