VR-09, VR-09B, VR-730: Backing Up Data

The VR-09, VR-09B, and VR-730 can back up all registrations to a connect USB key. This is a great way to back up your data for safe keeping:

1. Connect a USB flash drive to the USB MEMORY port.
2. Press the MENU button.
3. Turn the VALUE dial to select “Media Utility,” and press ENTER.
4. Use the CURSOR (^/v) buttons to select “Save Registration,” and press ENTER.
   The SAVE REGISTRATION screen will appear.
5. Turn the VALUE dial to select the save-destination number.
   Numbers for which a registration set name is shown already contain a saved registration set.
   If you select a previously-saved registration set as the save destination, the previously-saved registration set will be overwritten.
   If you don’t want to overwrite it, select a number for which “----------” is shown as the save-destination.
6. Press ENTER.
   If you select a number in which a registration set is already saved, the display will ask “Overwrite Registration OK?”
   If you are sure you want to overwrite it, press the ENTER button.
   If you decide to select a different number, press the EXIT button.
7. Assign a name to the registration set using the CURSOR (^/v) buttons and the VALUE dial.
8. Press the ENTER button or the SYNTH mode button.
   The registration set will be saved.

Note:
Do not turn off the power or disconnect the USB flash drive while “Executing...” is displayed.
When the backup is completed, press EXIT several times to return to the main screen.