The VR-09, VR-09B, and VR-730 can back up all registrations to a connect USB key, and these are saved in groups of 100 registrations. Registration sets can also be downloaded from the Roland Axial website (www.axial.roland.com). You can load all 100 registrations at one time, or you can load single registrations also if desired:
Note: Loading registrations from a USB over-writes the currently loaded registrations, so make sure you back up any important data before proceeding.
Restoring all 100 Registrations
- Connect a USB flash drive to the USB MEMORY port.
- Press the MENU button.
- Turn the VALUE dial to select “Media Utility,” and press ENTER.
- Use the CURSOR (^/v) buttons to select “Load Registration,” and press ENTER. The LOAD REGISTRATION screen will appear.
- Turn the VALUE dial to select the registration set you wish to load, and press ENTER.
Note: Do not turn off the power or disconnect the USB flash drive while “Executing...” is displayed.
When the restore is completed, press EXIT several times to return to the main screen.
Restoring a Single Registration
- Connect a USB flash drive to the USB MEMORY port.
- Press the MENU button.
- Turn the VALUE dial to select “Media Utility,” and press ENTER.
- Use the CURSOR (^/v) buttons to select “Load One Regist,” and press ENTER. The LOAD ONE REGIST screen will appear.
- Turn the VALUE dial to select the registration set containing the single registration you wish to load, and press ENTER.
- Use the VALUE dial and the CURSOR buttons to select the registration to be loaded ("From") and the location for it to be loaded to in the VR-09/09V/730 "To," then press ENTER. The registration will be loaded.
Note: Do not turn off the power or disconnect the USB flash drive while “Executing...” is displayed.
When the restore is completed, press EXIT several times to return to the main screen.