Random pattern generation function
1. While writing/playing a pattern, hold down the [MENU] button and press the [TAP] button.
The generated pattern is not written automatically.
Hold down the [MENU] button and long-press the [TAP] button to write the pattern.
In pattern play mode, an intro/fill-in is generated.
Tap Write (Realtime Recording)
You can create a pattern by using the [TAP] button to record each instrument in real time.
1. Start by clearing the position
“Selecting a position and clearing it”
2. Set the mode switch to “PATTERN WRITE 1st PART.”
3. Press the [START/STOP] button.
4. Set the [PRE-SCALE] switch to the desired position, and press the [CLEAR] button.
5. Use the select switch to choose the instrument that you want to use as a metronome (for example, RS:Rim Shot).
6. Press the STEP NO [1]–[16] button that will start the beat (Sounding the Metronome step).
7. Use the select switch to specify an instrument that you want to write by tapping.
8. Press the [TAP] button at the desired timing.
The LEDs light to indicate the step numbers that are closest to the timing of each tap.
9. To write the steps for other instruments or for the accent, repeat steps 7–8.
10. When you’ve finished writing, once again select the instrument that you selected in step 5, and clear the notes that you had been using as the metronome.
11. Press the [START/STOP] button.