M-480: How to Setup an M-480 as FOH and an M-480 as a Broadcasting Mixer
AeroCaster Switcher: Devices Compatible with the AeroCaster Switcher App
AeroCaster Switcher: Devices on which the AeroCaster Switcher app can be activated
AeroCaster Switcher: Does the AeroCaster Switcher app need to be activated every time it’s launched?
AeroCaster Switcher: How many screen layouts (scenes) can I register at maximum?
AeroCaster Switcher: How to Output an HDMI Signal from an iPad on which AeroCaster Switcher is being used
AeroCaster Switcher: How to Use Still Images or Videos Saved On an iPad as a Video Source
AeroCaster Switcher: I can’t activate the AeroCaster Switcher app.
AeroCaster Switcher: I can’t output an HDMI signal from the AeroCaster Switcher app.
AeroCaster Switcher: I can’t share my smartphone’s screen.

See more

M-400: Loading Mixer Settings from a USB Drive (Load)

May 01, 2023 06:33
Updated

The following steps will guide through loading mixer settings from a previously made USB backup.

Insert a USB memory into the USB MEMORY port of the M-400.
Press the SYSTEM button.
Press F3 (LOAD/SAVE).
Move the cursor to the project file list, and select the file that you want to load.
Move the cursor to the LOAD SECTION select buttons, and select the sections that you want to load.
Press F1 (LOAD).
Press F8 (LOAD). A “now processing” message will indicate the progress of the operation. When loading is completed, the progress indication will close.