If a user scene imported into the Aerophone AE-20/AE-20W does not produce sound, it may contain one of the following tones.
-
Preset Tones not included in the AE-20/AE-20W
Some preset Tones are only compatible with the AE-30 and are not included in the AE-20/AE-20W. If the Scene tries to recall any of these Tones, it does not sound. -
Tones or Waveforms of Wave Expansion (EXZ) downloaded from Roland Cloud
Wave Expansion (EXZ) provided by Roland Cloud is not compatible with the AE-20/AE-20W. If the imported Scene uses any Tones or Waveforms of Wave Expansion (EXZ), the AE-20/AE-20W does not sound. -
Tones with user samples
The Aerophone Pro AE-30 System Program Ver. 3.00 or later allows you to import and use Tones created on FANTOM-6/7/8 and FANTOM-06/07/08, which contain User Samples or multisamples. The AE-20/AE-20W does not support the User Sample function. If the imported User Scene contains a Tone with Samples, the AE-20/AE-20W does not sound.
The Aerophone Pro Editor helps you check whether a Tone or Sample is compatible or incompatible.
Follow the steps below:
- Start the Aerophone Pro Editor app and connect your AE-20/AE-20W.
Note: If this is your first time using the Aerophone Pro Editor app, connect it to the AE-20/AE-20W by following the "Preparing to Use the Aerophone Pro Editor" section in the Aerophone Pro Editor Owner's Manual. - Select the Scene you wish to check.
- Tap EDITOR at the bottom of the screen.
- Check the Tone.
- The preset Tone included only on the AE-30 is shown as "No Assign".
- The Tone of Wave Expansion is shown as "no media".
-If there is still no sound after checking the tone, follow steps 5 and beyond.
- The preset Tone included only on the AE-30 is shown as "No Assign".
- To check the User Sample or Waveform, hold down the part number of the Tone.
The PART VIEW screen appears. - Tap the [EDIT] button of the TONE.
The TONE VIEW screen appears. - Check each Partial.
- The Waveform of Wave Expansion is shown as "no media".
- The Tone with User Sample is shown as "Unsupported".
- The Waveform of Wave Expansion is shown as "no media".