TD-50X: Selecting an instrument for each area you strike (Head & Rim)

The TD-50X allows you to customize the kits. To assign any instrument to a pad, perform the steps below.

1. Press the [INSTRUMENT] button.
2. Press the PAGE [UP] button several times to display the INSTRUMENT screen.
3. Press the [F1] (INST) button.
   
4. Select the pad to configure by striking the pad.
5. Turn the [R1] knob to select an instrument.
   MEMO: When the cursor is on the instrument number or instrument group, press the [ENTER] button to show the instrument list.
   
   On screens where the [F5] (H&R) button is shown, you can choose whether instruments for areas such as the head and rim are selected together as a set (ON) or independently (OFF).
   

   [F5] (H&R) button	Explanation
   ON	Instruments for areas such as the head and rim are selected as a set. The recommended instruments that are appropriate for the selected instrument are selected as a set. * If the same parameter exists within the instruments that are selected as a set, it is automatically set to the same value. * Depending on the instrument, the same instrument might be selected for all areas such as the head and rim.
   OFF	Instruments are selected individually for each area you strike, such as the head and rim.

6. Press the [KIT] button to return to the DRUM KIT screen.