Setting the TUNER OUTPUT parameter to "BYPASS" turns off all effects and Amp Modeling while the Tuner is active, outputting only the dry guitar signal.
- Press the [C2/TUNER] switch to activate the Tuner.
- Turn the [2] knob to set TUNER OUTPUT to "BYPASS".
- Press the [C2/TUNER] switch or [EXIT] button to exit the Tuner.
This is a system-wide setting and is retained after the GX-100 is powered off. No manual save is required.
Refer to "Using the tuner" in the GX-100 Reference Manual for details on Tuner settings.