Use the following procedure to import a sample from a USB memory stick or from the FANTOM's internal storage to one of the sample pads:
- Press [PAD MODE].
- Press EDIT at the bottom left of the screen and then press SAMPLE PAD.
- Press IMPORT at the bottom right of the screen.
- Select the USB MEMORY tab if the sample is located on a connected USB memory stick.
- Select the INTERNAL STORAGE tab if the sample was recorded and saved directly to internal storage.
- Select the folder where the sample was saved and press [ENTER].
- Select the .wav file to be imported and press [ENTER] or "IMPORT".
- The SAMPLE IMPORT (SELECT DESTINATION) screen appears.
- Select the destination pad for the sample and press EXECUTE at the bottom right on the screen.
- Press OK to confirm (this will overwrite the existing sample in that location). If you do not wish to overwrite an existing sample, choose a different location/pad.
Note: Here are the specifications for the audio files that can be imported:
WAV: 8/16/24 bit rate, 44.1/48/96 kHz sampling frequency
AIFF: 8/16/24 bit rate, 44.1/48/96 kHz sampling frequency
MP3: MPEG-1 audio layer 3 format. 64/80/96/112/128/160/192/224/256/320 kbps, VBR (variable) bit rate. 44.1/48 kHz sampling frequency
For detailed instructions on how to record samples ("sampling") on the FANTOM, please consult the Owner's Manual available under Support on the FANTOM homepage: