You can control whether or not a specific Zone is affected by the damper pedal. Use only compatible pedals: Roland DP-2, DP-10, connected to the DAMPER/R connector.
- From any SCENE, press the [MENU] button.
- Use the [∧] [∨] cursor buttons to select SCENE EDIT.
- Press [ENTER].
- Use the [∧] [∨] cursor buttons to select ZONE EDIT.
- Press [ENTER].
- Press the [0], [1], or [2] buttons to select Zones UP1, UP2, or LOW respectively.
- Use [∧] [∨] to locate Ctrl Damper.
- Use the [DEC [INC] buttons to set the value to ON or OFF.
- When set to ON, the selected Zone will respond when using the damper pedal and the Tone of that Zone will be sustained/held.
- When set to OFF, the selected Zone will NOT respond when using the damper pedal and the Tone of that Zone will remain unaffected.
- Press [WRITE], select SCENE and press [ENTER].
- Follow the directions on the screen to finish saving your changes.