When you're using an expression pedal connected to the CTL1,2/ EXP input of the DM-101, via 1/4" TRS stereo cable, you can assign all 6 knobs to the expression pedal.
You can set the values of the 6 knobs (Mod Rate, Mod Depth, Variation, Delay Time, Intensity, Delay Volume) at once via the following procedure:
- Connect the expression pedal to the DM-101's EXP input.
- Set the 6 knobs as you wish when the EXP pedal is UP.
- Press TAP + Tap Division to enter the activation of the EXP pedal. The 'TRI' led starts to blink.
- If you wish to keep this setting on the EXP pedal's UP position, press Tap Division to save. The 'DOT' led starts to blink.
- Now set the 6 knobs as you wish when the EXP pedal is DOWN.
- Press Tap Division again to save this.
To save these settings in a Memory also, hold the Memory button and the Memory's LED starts to blink. Choose the Memory by pressing the Memory button you want to save this setting and hold the Memory button once more to save it to the selected Memory.
Expression pedals that are compatible for the DM-101:
All INFO: DM-101 Support