IR-2: How do I reset the unit to its factory default settings?

Performing a factory reset restores the BOSS IR-2 to its factory settings. See "Restoring the factory settings (Factory Reset)" in the IR-2 Owner's Manual, or follow the steps below.

Note: A factory reset erases all saved settings. If needed, use the IR-2 IR Loader app (macOS/Windows) to back up your settings beforehand.

1. Turn off the power (unplug the cable from the INPUT jack).
2. Set the type knob to “BROWN”.
3. Turn the other knobs besides the type knob all the way counterclockwise.
   
4. While holding down the pedal switch, turn on the power by inserting a plug into the INPUT jack.
   After the CHECK indicator lights up green, it switches to blinking orange.
5. Press the pedal switch.
   The CHECK indicator rapidly blinks orange.
   Once the CHECK indicator lights up orange continuously, the IR-2 is restored to its factory settings.
6. Turn off the power (unplug the cable from the INPUT jack).