RV-200: How do I restore the settings to the factory defaults?

By executing a factory reset, you can restore the settings of the RV-200 to their factory default state.

Perform the steps below:

1. While holding down the [ON/OFF] switch and [MEMORY/HOLD] switch, turn on the power (insert a plug into the INPUT A/MONO jack).
   
   
   The display indicates “FCt”.
2. Once the [MEMORY/HOLD] switch indicator begins blinking, press the [MEMORY/HOLD] switch.
   The display indicates “SVr”.
   
   If you decide to cancel, press the [MEMORY] button.
3. Press the [MEMORY/HOLD] switch again.
   This executes the factory reset.
4. When “Fin” appears in the display, turn the power off and then on again (unplug and then reinsert the plug into the INPUT A/MONO jack).