RV-200: How do I enable the MIDI thru function?

The RV-200 can transmit MIDI messages fed into the MIDI IN jack from an external MIDI device through the MIDI OUT jack.

To enable this function, turn on the MIDI THRU.

Perform the steps below:

1. Press the [DENSITY] and [MEMORY] buttons at the same time to access MENU mode.
   
   The unit enters MENU mode.
2. Turn the [TIME] knob to select "MIDI THRU", and then press the [TIME] knob.
   
   The value is displayed.
3. Turn the [TIME] knob to turn it "ON".
4. Press the [TIME] knob.
5. Press the [DENSITY] and [MEMORY] buttons at the same time to exit MENU mode.