A-33: How Do I Check the Battery Condition?

The A-33 uses the PATCH/TONE LEDs to display the remaining battery condition.

To check the remaining battery condition, follow these steps:

1. Press [MODE EDIT] so it is lit.
2. Press [MIDI/PARAM].
3. Press 2, then 7 using the PATCH/TONE buttons.
4. Press and hold [ENTER].
   The display is shown only while [ENTER] is held.
   • The PATCH/TONE LEDs indicate the current battery condition. Each lit LED represents approximately 2 hours of remaining use.
   • When using fresh alkaline batteries, the unit can be used continuously for approximately 25 hours.
5. Release [ENTER] when finished.