FR-3X: How to load user set memories from a USB flash drive
The FR-3x allows you to copy individual Sets from a USB memory to the four internal “USER” Set locations. The Set files (with the extension “.ST3”) must first be copied to a USB memory’s root directory before loading them into the FR-3x’s “USER” area.
NOTE: Be sure to connect your USB memory before proceeding.
1. Press and hold down the [SET] register. The display shows the name of the last parameter you selected.
2. Use treble register [3] or [4] (PARAM LIST) to select “USt” (User Set).
3. Use treble registers [1] and [2] (VALUE) to select the file number of the Set you want to load. If the USB memory doesn’t contain any Set files, the display will show “---” instead of a number.
4. Press treble register [7] (ENTER) to confirm your selection.
5. Use treble registers [1] and [2] (VALUE) to select the desired target memory (1~4). (The FR-3x suggests “USER” memory “1” as target for the Set file.)
6. Press treble register [7] (ENTER) to load the selected Set. The display shows “lod” (Load), then “don” (Done) to indicate that the file was loaded successfully. Next, the FR-3x returns to the main page.