USB Audio Input/ Output Gain parameters were added to the TD-30 with the version 1.10 upgrade. These parameters let you adjust the levels (if necessary) when transmitting audio via the TD-30's USB port to/from the computer.
Note: Version 1.10 or higher must be installed in the TD-30 to access these settings.
- Press SETUP.
- Press F5 to select the "B" tab.
- Press F2(GAIN).
- Use the cursor buttons and/or value dial to highlight and adjust the USB Input and Output Gain settings as needed.
- Press EXIT when you're finished. The new settings are saved automatically.