You can use an SD card in the TM-2 to backup your settings, or to play .WAV files by hitting the pads/triggers. Before an SD card can be used in the TM-2, it must be formatted first. Here are the steps to format an SD card:
CAUTION: Formatting the SD card permanently erases ALL data on the card. Be sure to save any data onto your computer before following these steps.
- Check the SD card and confirm that the sliding "lock" switch is not set to the Lock position.
- Insert your SD card into the card slot on the front panel of the TM-2.
- Press and hold the SHIFT button and then press the INST button.
- Press the right arrow button (>) repeatedly until "SD CARD FORMAT" appears in the display.
- Press the + button (ENTER) - "SD CARD FORMAT SURE?" appears in the display.
- Press the + button. "ARE YOU SURE" appears.
- Press the "2" button.