You can route the audio signal from the AUDIO IN jacks of the SPD-SX and SPD-SX Special Edition (SE) to different outputs.
How to Change the Setting
- Press [MENU].
- Select "SYS", then press [ENTER].
- Select "AUDIO IN/OUT", then press [ENTER].
- Select "AUDIO IN", then choose the desired setting.
- MASTER: Routes to MASTER OUT and PHONES jacks.
- SUB OUT: Routes to SUB OUT and PHONES jacks.
- PHONES: Routes to PHONES jack only.
- Press [KIT] to exit.
The new setting is saved automatically.
Note: If the outputs are connected to a mixer that sends audio back into the AUDIO IN jacks, selecting MASTER may create an audio loop.