The signal of each channel of the VM-3100 can be routed to any of the four
available busses. Use the following procedure to route a channels signal to a
bus or combination of busses:
1. Press the SELECT button of the desired channel.
2. Press BUS ASSIGN.
3. Use the CURSOR [<, >, ^ or v] buttons to select a bus.
4. Use the VALUE dial to place a check mark by the bus.
5. Press LEVEL METER to return to the main mixer display.
available busses. Use the following procedure to route a channels signal to a
bus or combination of busses:
1. Press the SELECT button of the desired channel.
2. Press BUS ASSIGN.
3. Use the CURSOR [<, >, ^ or v] buttons to select a bus.
4. Use the VALUE dial to place a check mark by the bus.
5. Press LEVEL METER to return to the main mixer display.