Use the following procedure to write a Patch into memory:
1) Press WRITE.
2) Use the number buttons [1] - [0] to select a destination Patch number.
3) Press ENTER.
4) If "WRITE PROTECTED" is displayed, press WRITE followed by FUNCTION and use
VALUE ^ / v to select "PROTECT = OFF."
5) Press FUNCTION.
6) Press ENTER.
1) Press WRITE.
2) Use the number buttons [1] - [0] to select a destination Patch number.
3) Press ENTER.
4) If "WRITE PROTECTED" is displayed, press WRITE followed by FUNCTION and use
VALUE ^ / v to select "PROTECT = OFF."
5) Press FUNCTION.
6) Press ENTER.