A G-600 Performance Memory includes settings for Tone selection, Music Style,
tempo, transpose, and volume.
There are 192 Performance Memory locations in the G-600. Use the following
procedure to write a Performance Memory:
1) Press and hold WRITE. Continue holding down this button while executing
steps 2-4.
NOTE: If the G-600s memory is protected, "Internal Memory is PROTECTED!!"
will be displayed following step #1.
To disable protection, release WRITE and press UPPER 1 [Yes]. Return to step
#1 to continue the writing procedure.
2) Use the Tone/Performance Memory GROUP buttons to select a destination
Group.
3) Use the Tone/Performance Memory number buttons [1-8] to select a
destination Bank.
4) Use the Tone/Performance Memory number buttons [1-8] to select a
destination memory.
5) Release WRITE.
tempo, transpose, and volume.
There are 192 Performance Memory locations in the G-600. Use the following
procedure to write a Performance Memory:
1) Press and hold WRITE. Continue holding down this button while executing
steps 2-4.
NOTE: If the G-600s memory is protected, "Internal Memory is PROTECTED!!"
will be displayed following step #1.
To disable protection, release WRITE and press UPPER 1 [Yes]. Return to step
#1 to continue the writing procedure.
2) Use the Tone/Performance Memory GROUP buttons to select a destination
Group.
3) Use the Tone/Performance Memory number buttons [1-8] to select a
destination Bank.
4) Use the Tone/Performance Memory number buttons [1-8] to select a
destination memory.
5) Release WRITE.