The G-1000 is shipped from the factory with the display set to Easy mode. In
this mode, the "MASTER" page displays a minimum amount of information. To
display more information the Expert mode must be selected. Use the following
procedure to select the Master Display setting:
1) If necessary, press F5 to return to the "MASTER" page.
2) Press F2 [Param].
3) Press F4 [Name].
4) If necessary, press the PAGE [v] button to select [SET].
5) Use the ACCOMP/GROUP knob to select the desired setting, "Easy" or
"Expert."
6) Press LOWER 1 to display "OK!!! FUNCTION COMPLETE."
7) Press F5 [Exit].
this mode, the "MASTER" page displays a minimum amount of information. To
display more information the Expert mode must be selected. Use the following
procedure to select the Master Display setting:
1) If necessary, press F5 to return to the "MASTER" page.
2) Press F2 [Param].
3) Press F4 [Name].
4) If necessary, press the PAGE [v] button to select [SET].
5) Use the ACCOMP/GROUP knob to select the desired setting, "Easy" or
"Expert."
6) Press LOWER 1 to display "OK!!! FUNCTION COMPLETE."
7) Press F5 [Exit].