You can access Tones from a SN-R8 series PCM card in two ways. One method is
loading the ROM card, which automatically loads card sounds onto pads and
installs a new demo song. (Caution: This will also erase any data that you have
programmed into the unit.) The second method involves assigning Card Tones to
Pads one at a time.
Use the following procedure to load the entire ROM card:
1) Press CARD.
2) Press NUMBER 4 to select the ROM Card Mode.
3) Press NUMBER 1 to assign sounds to pads or press NUMBER 2 to hear the demo
song and sounds.
4) Press ENTER.
Use the following procedure to assign Card tones to a Pad:
1) Press the INST ASSIGN button
2) Press NUMBER 1 to select [INST]
3) Tap the Pad that you want to use the card sound on.
4) Use the + and - buttons or the VALUE slider to select the sound. The card
sounds are located after the internal sounds indicated by Exx.
loading the ROM card, which automatically loads card sounds onto pads and
installs a new demo song. (Caution: This will also erase any data that you have
programmed into the unit.) The second method involves assigning Card Tones to
Pads one at a time.
Use the following procedure to load the entire ROM card:
1) Press CARD.
2) Press NUMBER 4 to select the ROM Card Mode.
3) Press NUMBER 1 to assign sounds to pads or press NUMBER 2 to hear the demo
song and sounds.
4) Press ENTER.
Use the following procedure to assign Card tones to a Pad:
1) Press the INST ASSIGN button
2) Press NUMBER 1 to select [INST]
3) Tap the Pad that you want to use the card sound on.
4) Use the + and - buttons or the VALUE slider to select the sound. The card
sounds are located after the internal sounds indicated by Exx.