RPS-10: Technical Specifications

RPS-10 DIGITAL PITCH SHIFTER / DELAY

INPUT LEVEL / INPUT IMPEDANCE:
-20dBm / 1MW, -10dBm / 47kW

OUTPUT LEVEL / OUTPUT IMPEDANCE:
-20dBm / 2kW, -10dBm / 2kW

OUTPUT LOAD IMPEDANCE:
Over 10 kW

PITCH SHIFTING:
- 1 to + 1 octave

DELAY TIME:
25 to 800 ms

FREQUENCY RESPONSE:
Direct : 10 Hz to 30 kHz (+1 / -3 dB)
Pitch Shift / Delay : 40 Hz to 15 kHz (+1 / -3 dB)

RESIDUAL NOISE:
Below - 90 dBm
(IHF - A, Level Switch - 20 dBm)

PITCH SHIFTING CONTROLLING INPUT:
C5 (523.25 Hz) to C7 (2093 Hz)

TUNER OUTPUT (At Effect On):
C2 (65, 4Hz) to C4 (261.6 Hz)

CONTROLS:
Delay Range / Pitch Shift Mode
Pitch
Pitch Fine / Delay Time Fine
Feedback Level
Mix Balance

SWITCHES:
Power
Effect (On / Off)
Level ( -20 dBm / - 10 dBm)

INDICATORS:
Power
Effect

JACKS:
Inputs (Standard Phones, Pin)
Outputs (Standard Phones, Pin)
Hold (On / Off)
Effect Remote (On / Off)
Tuner Output
Keyboard Control
AC Adaptor (In / Out)

POWER:
9V DC (BOSS PSA - 120, 220 or 240)

CURRENT DRAW:
100 mA

DIMENSIONS:
218 (W) x 169 (D) x 44 (H) mm
8 - 9 / 16' (W) x 6 - 11 / 16' (D) x 1 - 3 / 4' (H) inches

WEIGHT:
900g / 2lb

ACCESSORY:
DC Cord (0.5m)
Rubber Feet (x 4)

OPTIONS:
AC Adaptor BOSS PSA-120, 220 or 240
Pedal Switch DP-2
Footswitch FS-1
Rack Mount Adaptor RAD-10
Power Supply RPW-7
Micro System Rack BMR-5