The GT-3 can be used with a guitar amp or full-range PA. You can specify the
type of amp being used such as combo, stack, or line. Connect two audio cables
from the GT-3's stereo outputs to the left and right inputs of your sound
system. Use the following procedure to set up the GT-3:
1. Press UTILITY.
2. Use the VALUE dial to select the type of amp.
3. Press EXIT.
4. Connect your guitar cable to the back panel input.
5. Adjust the output level of your guitar so that Overload lights up only
during your loudest notes.
type of amp being used such as combo, stack, or line. Connect two audio cables
from the GT-3's stereo outputs to the left and right inputs of your sound
system. Use the following procedure to set up the GT-3:
1. Press UTILITY.
2. Use the VALUE dial to select the type of amp.
3. Press EXIT.
4. Connect your guitar cable to the back panel input.
5. Adjust the output level of your guitar so that Overload lights up only
during your loudest notes.