Use the following steps to change settings for the Ad-lib function of the
D-Beam:
1) Press the D-Beam ON button so that it is lit.
2) While holding the D-Beam ON button turn the Value Dial to select "27:
Adlib1" or "28:Adlib2."
3) While holding the D-Beam ON button use the PAGE < / > buttons to select a
scale type.
4) While holding the D-Beam ON button press a KEYPAD to select the key.
D-Beam:
1) Press the D-Beam ON button so that it is lit.
2) While holding the D-Beam ON button turn the Value Dial to select "27:
Adlib1" or "28:Adlib2."
3) While holding the D-Beam ON button use the PAGE < / > buttons to select a
scale type.
4) While holding the D-Beam ON button press a KEYPAD to select the key.