Use the following procedure to write a Timbre into memory:
1. Press DATA.
2. Cursor to "Write," then press ENTER.
3. Cursor to "Timbre," then press ENTER.
4. Use the VALUE UP and DOWN buttons to select the desired location of the Timbre.
5. Press ENTER followed by VALUE UP to complete the Write procedure.
Use the following procedure to write a Patch into memory:
1. Press DATA.
2. Cursor to "Write," then press ENTER.
3. Cursor to "Patch," then press ENTER.
4. Use the VALUE UP and DOWN buttons to select the desired location of the Patch.
5. Press ENTER followed by VALUE UP to complete the Write procedure.
1. Press DATA.
2. Cursor to "Write," then press ENTER.
3. Cursor to "Timbre," then press ENTER.
4. Use the VALUE UP and DOWN buttons to select the desired location of the Timbre.
5. Press ENTER followed by VALUE UP to complete the Write procedure.
Use the following procedure to write a Patch into memory:
1. Press DATA.
2. Cursor to "Write," then press ENTER.
3. Cursor to "Patch," then press ENTER.
4. Use the VALUE UP and DOWN buttons to select the desired location of the Patch.
5. Press ENTER followed by VALUE UP to complete the Write procedure.