Sending or receiving system exclusive data is commonly called a bulk dump or bulk load, respectively. Use the following procedure to send a bulk dump:
1. Press the DATA button.
2. CURSOR to "Bulk" and press ENTER.
3. Use the CURSOR to select TEMP, INTERNAL or RAM CARD.
4. Press ENTER.
5. Use the VALUE buttons to select the desired data and press ENTER.
1. Press the DATA button.
2. CURSOR to "Bulk" and press ENTER.
3. Use the CURSOR to select TEMP, INTERNAL or RAM CARD.
4. Press ENTER.
5. Use the VALUE buttons to select the desired data and press ENTER.