The EM-2000 allows the user to select different control functions for the
D-Beam. Use the following procedure to access the D-Beam Parameter Menu:
1) From the MASTER menu, press F2 [Param].
2) Press F3 [Cntrl].
3) Press PAGE[ v ] repeatedly to display "Parameter...D BEAM ASSIGN."
4) Turn the ACCOMP GROUP knob to select the desired parameter.
5) Press F5 [Exit] to return to the MASTER menu.
Note: There is a short cut procedure to go directly to the D-Beam Parameter
Menu:
1) Press and hold the D BEAM ON button until the D-Beam Parameter Menu is
displayed.
2) Turn the ACCOMP GROUP knob to select the desired parameter.
3) Press F5 [Exit] to return to the MASTER menu.
D-Beam. Use the following procedure to access the D-Beam Parameter Menu:
1) From the MASTER menu, press F2 [Param].
2) Press F3 [Cntrl].
3) Press PAGE[ v ] repeatedly to display "Parameter...D BEAM ASSIGN."
4) Turn the ACCOMP GROUP knob to select the desired parameter.
5) Press F5 [Exit] to return to the MASTER menu.
Note: There is a short cut procedure to go directly to the D-Beam Parameter
Menu:
1) Press and hold the D BEAM ON button until the D-Beam Parameter Menu is
displayed.
2) Turn the ACCOMP GROUP knob to select the desired parameter.
3) Press F5 [Exit] to return to the MASTER menu.