SE-70 SUPER EFFECTS PROCESSOR
SIGNAL PROCESSING:
AD Conversion: 16-bit linear (64 times oversampling, delta sigma process)
DA Conversion: 16-bit linear (8 times oversampling)
SAMPLING FREQUENCY:
48 kHz / 32 kHz (Set Every Algorithm)
PROGRAMS/MEMORY LOCATIONS:
145 Total
User Area: 1 to 100
Preset Area: 101 to 145
FREQUENCY RESPONSE:
10 Hz to 22 kHz +0 / -3 dB (Sampling Frequency: 48 kHz)
10 Hz to 15 kHz +0 / -3 dB (Sampling Frequency: 32 kHz)
(0 dBm=0.775 Vrms)
NOMINAL INPUT LEVEL:
- 20 / +4 dBm
INPUT IMPEDANCE:
1M ohms
NOMINAL OUTPUT LEVEL:
-20/+4 dBm
RECOMMENDED LOAD IMPEDANCE:
20 k ohms or greater
RESIDUAL NOISE:
- 100 dBm or less (IHF-A)
(LEVEL Switch: -20 dBm, THRU)
INPUT GAIN:
-20 dB to + 12 dB
DISPLAY:
LCD (16 Characters, 2 Lines, Backlit LCD)
CONTROLS:
< FRONT >
Input Level Knob (L / R)
Control Knob (Effect Button)
Parameter Button Up / Down (Cursor Button Up / Down)
Control 1 Button
Utility Button
Write Button
Exit Button
Power Switch
< REAR >
Level Switch
CONNECTIONS:
< FRONT >
Phones Jack
< REAR >
Input Jacks L (MONO) / R
Output Jacks L (MONO) / R
Control 2 / 3 Jack
Effect Remote / Esp Pedal Jack
MIDI Connectors: IN, OUT / THRU
AC Adaptor Jack
INDICATORS:
Overload (L / R) Indicators
Effect ON / OFF Indicator
Utility Indicator
Control 1 Indicator
POWER:
12 V AC (BOSS BRB-120, 220, 240)
CURRENT DRAW:
1.5 A
DIMENSIONS:
218 (W) x 44 (H) x 240 (D) mm
8 - 5 / 8 (W) x 1 - 3 / 4 (H) x 9 - 1 / 2 (D) inches
WEIGHT:
1.5 kg / 33 lbs
ACCESSORIES:
AC Adaptor: BOSS BRB-120, 220, 240
Foot Rubber x 4
Owners Manual
Algorithm Guide
OPTIONS:
Rack Mount Adaptor: RAD-50 *The RAD-10 Rack Mount Adaptor Cannot Be Used for
This Unit
Foot Switch: FS-5U, FS-5L
Insert Cable: PCS-31, PCS-33
MIDI Foot Controller: FC-50
Expression Pedal: FV-300L, EV-5 (Roland)
SIGNAL PROCESSING:
AD Conversion: 16-bit linear (64 times oversampling, delta sigma process)
DA Conversion: 16-bit linear (8 times oversampling)
SAMPLING FREQUENCY:
48 kHz / 32 kHz (Set Every Algorithm)
PROGRAMS/MEMORY LOCATIONS:
145 Total
User Area: 1 to 100
Preset Area: 101 to 145
FREQUENCY RESPONSE:
10 Hz to 22 kHz +0 / -3 dB (Sampling Frequency: 48 kHz)
10 Hz to 15 kHz +0 / -3 dB (Sampling Frequency: 32 kHz)
(0 dBm=0.775 Vrms)
NOMINAL INPUT LEVEL:
- 20 / +4 dBm
INPUT IMPEDANCE:
1M ohms
NOMINAL OUTPUT LEVEL:
-20/+4 dBm
RECOMMENDED LOAD IMPEDANCE:
20 k ohms or greater
RESIDUAL NOISE:
- 100 dBm or less (IHF-A)
(LEVEL Switch: -20 dBm, THRU)
INPUT GAIN:
-20 dB to + 12 dB
DISPLAY:
LCD (16 Characters, 2 Lines, Backlit LCD)
CONTROLS:
< FRONT >
Input Level Knob (L / R)
Control Knob (Effect Button)
Parameter Button Up / Down (Cursor Button Up / Down)
Control 1 Button
Utility Button
Write Button
Exit Button
Power Switch
< REAR >
Level Switch
CONNECTIONS:
< FRONT >
Phones Jack
< REAR >
Input Jacks L (MONO) / R
Output Jacks L (MONO) / R
Control 2 / 3 Jack
Effect Remote / Esp Pedal Jack
MIDI Connectors: IN, OUT / THRU
AC Adaptor Jack
INDICATORS:
Overload (L / R) Indicators
Effect ON / OFF Indicator
Utility Indicator
Control 1 Indicator
POWER:
12 V AC (BOSS BRB-120, 220, 240)
CURRENT DRAW:
1.5 A
DIMENSIONS:
218 (W) x 44 (H) x 240 (D) mm
8 - 5 / 8 (W) x 1 - 3 / 4 (H) x 9 - 1 / 2 (D) inches
WEIGHT:
1.5 kg / 33 lbs
ACCESSORIES:
AC Adaptor: BOSS BRB-120, 220, 240
Foot Rubber x 4
Owners Manual
Algorithm Guide
OPTIONS:
Rack Mount Adaptor: RAD-50 *The RAD-10 Rack Mount Adaptor Cannot Be Used for
This Unit
Foot Switch: FS-5U, FS-5L
Insert Cable: PCS-31, PCS-33
MIDI Foot Controller: FC-50
Expression Pedal: FV-300L, EV-5 (Roland)