The XV-5080 has a Factory Reset function which returns all settings to their original Factory Settings.
Be sure to save all Samples, User Performances, User Patches and User Rhythm Sets, as they will be lost during this procedure.
To Reset the XV-5080 to its Factory settings use the following procedure:
- Press [SYSTEM/UTILITY], getting its indicator to start blinking.
* If the indicator is steadily lit, you are in SYSTEM mode. Press [SYSTEM/UTILITY] once again, so the indicator is blinking. - Press [F6 (Menu)] to select Menu 3.
- Press [F5 (Factory)].
The Factory Reset page appears. Press [F6 (Execute)] to execute Factory Reset.
To cancel the Factory Reset, press [EXIT].
After the Factory Reset operation has been executed, the PATCH PLAY page will appear.The message “Write Protect ON” may appear in a window. If you want to continue with the Factory Reset, press [DEC] to set Write Protect to “OFF,” and press [F6 (OK)] to close the window. Then press [F6 (Factory)] once more to execute the Factory Reset.
Once set to “OFF,” Write Protect remains disabled until the power to the instrument is turned off.