The RD-700 features a Tone Wheel Organ mode that simulates the harmonic
drawbars of a vintage organ. To use one of the ten Tone Wheel Organs:
1. Press PIANO above ONE TOUCH.
2. Press ORGAN below TONE SELECT.
3. Use the DEC/NO or INC/YES buttons to select Tone Wheel 1 (Tone # 80).
4. Press the right CURSOR button.
5. Use the PART LEVEL sliders to make any desired drawbar changes.
NOTE: If all four PART SWITCH buttons are lit, the PART LEVEL sliders control
the four left-hand
drawbars in the display. If the PART SWITCH buttons aren't lit, the PART LEVEL
sliders control the four right-hand draw bars in the display. Pressing any of
the four PART SWITCH buttons toggles between these two modes. Use the PITCH
BEND Lever to control the rotary speed.
drawbars of a vintage organ. To use one of the ten Tone Wheel Organs:
1. Press PIANO above ONE TOUCH.
2. Press ORGAN below TONE SELECT.
3. Use the DEC/NO or INC/YES buttons to select Tone Wheel 1 (Tone # 80).
4. Press the right CURSOR button.
5. Use the PART LEVEL sliders to make any desired drawbar changes.
NOTE: If all four PART SWITCH buttons are lit, the PART LEVEL sliders control
the four left-hand
drawbars in the display. If the PART SWITCH buttons aren't lit, the PART LEVEL
sliders control the four right-hand draw bars in the display. Pressing any of
the four PART SWITCH buttons toggles between these two modes. Use the PITCH
BEND Lever to control the rotary speed.