The following procedure can be used to clear the internal memory and reload the
factory settings:
(CAUTION: All USER information will be lost. Be sure to back up any information
you wish to keep.)
1. Press UTILITY.
2. Cursor down to Utility Menu 2.
3. Cursor right three times to select FACTORY RESET.
4. Press ENTER twice.
5. If Internal Write Protect is set to ON, turn the VALUE dial to select OFF.
6. Press ENTER three times.
factory settings:
(CAUTION: All USER information will be lost. Be sure to back up any information
you wish to keep.)
1. Press UTILITY.
2. Cursor down to Utility Menu 2.
3. Cursor right three times to select FACTORY RESET.
4. Press ENTER twice.
5. If Internal Write Protect is set to ON, turn the VALUE dial to select OFF.
6. Press ENTER three times.