Use the following procedure to move recorded audio data between two specific times:
- Press [UTILITY].
- Press CURSOR [<] or="or" [="[">] to move the cursor to "TRK," and press [ENTER].
- Press CURSOR [<] or="or" [="[">] to move the cursor to "MOV," and press [ENTER].
- Turn the TIME/VALUE dial to select "TME/MES" and press [ENTER].
- Use CURSOR [<] or="or" [="[">] and the TIME/VALUE dial to select the track/V-Track to move from, and track/VTrack to move to.
- Press [ENTER].
- Use [CURSOR] and the TIME/VALUE dial to specify the beginning of the portion "S" (Start) of data you want to move.
- Press [ENTER].
- Use [CURSOR] and the TIME/VALUE dial to specify the ending of the portion "E" (End) of data you want to move.
- Press [ENTER].
- Use [CURSOR] and the TIME/VALUE dial to specify the time of the beginning of the location "T" (To) where you want the data moved.
- When you are ready to execute the move, press [ENTER]. The display will ask "Are you sure?," so that you can confirm the operation.
- Press [ENTER]. The Track Move is executed.
- Press [UTILITY] (or press [EXIT] repeatedly) to return to the Play screen.
NOTE: You can also enter the time using [LOCATOR], [ZERO], [STOP] + [REW], [STOP] + [FF], and AUTO PUNCH [IN/OUT].