It is possible to send the direct signal from a single channel to one of the outputs. Use the following procedure to route the signal from TRACK 1 to AUX A(L):
1. Click on the Track number for Track 1.
2. Click on DIR 1.
3. Click EZ ROUTING.
4. Click ROUTING VIEW.
5. Drag the virtual connection from AUX A to DIR 1/2 by clicking and holding the left mouse button.
NOTE: There are 8 direct outs. They can be used from any channel(input or track.)
1. Click on the Track number for Track 1.
2. Click on DIR 1.
3. Click EZ ROUTING.
4. Click ROUTING VIEW.
5. Drag the virtual connection from AUX A to DIR 1/2 by clicking and holding the left mouse button.
NOTE: There are 8 direct outs. They can be used from any channel(input or track.)