The optional MB-24 meter bridge can display any of the mixer views of the VS-2480. Use the following procedure to set up the MB-24 to display the input mixer section while operating in the VS-2480's LCD mode:
1. Press UTILITY.
2. Press F1(SYSTEM). If SYSTEM is not displayed over F1, press PAGE until it is, then press F1(SYSTEM).
3. Press F1(Param1).
4. Cursor to DISPLAY SECTION.
5. Turn the TIME/VALUE dial to select INPUT MIXER 1-24.
Use the following procedure to set up the MB-24 to display the input mixer section while operating in the VS-2480's VGA mode:
1. Click on Utility.
2. Click on System Parameter.
3. Click on DISPLAY SECTION.
4. Click and drag the cursor to display "INPUT MIXER 1-24".
1. Press UTILITY.
2. Press F1(SYSTEM). If SYSTEM is not displayed over F1, press PAGE until it is, then press F1(SYSTEM).
3. Press F1(Param1).
4. Cursor to DISPLAY SECTION.
5. Turn the TIME/VALUE dial to select INPUT MIXER 1-24.
Use the following procedure to set up the MB-24 to display the input mixer section while operating in the VS-2480's VGA mode:
1. Click on Utility.
2. Click on System Parameter.
3. Click on DISPLAY SECTION.
4. Click and drag the cursor to display "INPUT MIXER 1-24".