You can send MTC (midi time code) to syncronize with software based sequencer/recording programs or other stand alone recorders from the VS. First connect a single midi cable from the VS recorder's midi out to the midi in of your computer or other recording device.
1. Press the System button until "Sync/Tempo ?" appears in the display and press Enter/Yes. The display will say Source= INT.
2. Press the Parameter right >> button until the display reads Gen.= Off
3. Turn the Time/Value dial to select MTC.
4. Press the Play/Display button to return to the main screen.
Note: You must now put the other device in External sync mode, MTC (midi time code).
1. Press the System button until "Sync/Tempo ?" appears in the display and press Enter/Yes. The display will say Source= INT.
2. Press the Parameter right >> button until the display reads Gen.= Off
3. Turn the Time/Value dial to select MTC.
4. Press the Play/Display button to return to the main screen.
Note: You must now put the other device in External sync mode, MTC (midi time code).